Engineering

Ultra-Cast™

	Ratio with part B
Name & Description	Wt.	Vol.	Gel (100g)	Shore	Colour	Comments
Ultra-Cast™10/50
Ultra-Cast™ 10/50 PU Elastomer	3	3.5	5-10m	50A	Natural	High performance, general purpose moulding. Room temperature cure, polyols remain liquid at ambient temperatures
Ultra-Cast™10/65
Ultra-Cast™ 10/65 PU Elastomer	2.9	2.47	5-10m	65A	Natural	High performance, general purpose moulding. Room temperature cure, polyols remain liquid at ambient temperatures
Ultra-Cast™10/75
Ultra-Cast™ 10/75 PU Elastomer	2.4	2.98	5-10m	75A	Natural	High performance, general purpose moulding. Room temperature cure, polyols remain liquid at ambient temperatures
Ultra-Cast™10/80
Ultra-Cast™ 10/80 PU Elastomer	2.1	2.45	5-10m	80A	Natural	High performance, general purpose moulding. Room temperature cure, polyols remain liquid at ambient temperatures
Ultra-Cast™10/85
Ultra-Cast™ 10/85 PU Elastomer	1.9	2.28	5-10m	85A	Natural	High performance, general purpose moulding. Room temperature cure, polyols remain liquid at ambient temperatures
Ultra-Cast™10/95
Ultra-Cast™ 10/95 PU Elastomer	1.5	1.79	5-10m	95A	Natural	High performance, general purpose moulding. Room temperature cure, polyols remain liquid at ambient temperatures
Ultra-Cast™ E040
Ultra-Cast™ E040 PU Elastomer	1.9	2.28	25m	85A	Natural	Slow gel version of Ultra-Cast™ 10/85
Ultra-Cast™ E045
Ultra-Cast™ E045 PU Elastomer	2	2.15	11m	85A	Black	Flame retardant version of Ultra-Cast™ 10/85
Ultra-Cast™ E053
Ultra-Cast™ E053 PU Elastomer	1.5	1.79	5-10m	95A	Natural	Low extractables version of Ultra-Cast™ 10/95
Ultra-Cast™ E054
Ultra-Cast™ E054 PU Elastomer	2.1	2.43	5-10m	80A	Natural	Non-silicone version of Ultra-Cast™ 10/80
Ultra-Cast™ E061
Ultra-Cast™ E061 PU Elastomer	1.5	1.8	5-10m	95A	Natural	Non-silicone version of Ultra-Cast™ 10/95
Ultra-Cast™ E063
Ultra-Cast™ E063 PU Elastomer	1.9	2.28	75m	85A	Natural	Very slow gel version of Ultra-Cast™ 10/85
Ultra-Cast™ E078
Ultra-Cast™ E078 PU Elastomer	2	2.15	30m	85A	Natural	Slow gel version of Ultra-Cast™ E045
Ultra-Cast™20/65
Ultra-Cast™ 20/65 PU Elastomer	2.2	2.31	12m	65A	Natural	Very high performance PU Elastomer series. High levels of abrasion resistance, tear strength and other physical properties.
Ultra-Cast™20/75
Ultra-Cast™ 20/75 PU Elastomer	1.6	1.68	12m	75A	Natural	Very high performance PU Elastomer series. High levels of abrasion resistance, tear strength and other physical properties.
Ultra-Cast™20/85
Ultra-Cast™ 20/85 PU Elastomer	1.2	1.26	12m	85A	Natural	Very high performance PU Elastomer series. High levels of abrasion resistance, tear strength and other physical properties.
Ultra-Cast™20/95
Ultra-Cast™ 20/95 PU Elastomer	0.8	0.86	12m	95A	Natural	Very high performance PU Elastomer series. High levels of abrasion resistance, tear strength and other physical properties.
Ultra-Cast™ E048
Ultra-Cast™ E048 PU Elastomer	0.95	1	8m	85A	Black	Cartridgeable, flame retardant Ultra-Cast™ 20/85
Ultra-Cast™ E052
Ultra-Cast™ E052 PU Elastomer	2.2	2.31	58m	65A	Natural	Slow gel version of Ultra-Cast™ 20/65
Ultra-Cast™900/55
Ultra-Cast™ 900/55 PU Elastomer	1.342		3m (95°C)	55A	Natural	Extremely high performance PU Elastomers. Very high levels of abrasion resistance, tear strength and other physical properties. Much lower toxicity than traditional TDI/MOCHA cured systems with similar performance.
Ultra-Cast™900/60
Ultra-Cast™ 900/60 PU Elastomer	1.193		3m (95°C)	60A	Natural	Extremely high performance PU Elastomers. Very high levels of abrasion resistance, tear strength and other physical properties. Much lower toxicity than traditional TDI/MOCHA cured systems with similar performance.
Ultra-Cast™900/65
Ultra-Cast™ 900/65 PU Elastomer	1.085		3m (95°C)	65A	Natural	Extremely high performance PU Elastomers. Very high levels of abrasion resistance, tear strength and other physical properties. Much lower toxicity than traditional TDI/MOCHA cured systems with similar performance.
Ultra-Cast™900/70
Ultra-Cast™ 900/70 PU Elastomer	0.893		3m (95°C)	70A	Natural	Extremely high performance PU Elastomers. Very high levels of abrasion resistance, tear strength and other physical properties. Much lower toxicity than traditional TDI/MOCHA cured systems with similar performance.
Ultra-Cast™900/75
Ultra-Cast™ 900/75 PU Elastomer	0.747		3m (95°C)	75A	Natural	Extremely high performance PU Elastomers. Very high levels of abrasion resistance, tear strength and other physical properties. Much lower toxicity than traditional TDI/MOCHA cured systems with similar performance.
Ultra-Cast™900/80
Ultra-Cast™ 900/80 PU Elastomer	0.555		3m (95°C)	80A	Natural	Extremely high performance PU Elastomers. Very high levels of abrasion resistance, tear strength and other physical properties. Much lower toxicity than traditional TDI/MOCHA cured systems with similar performance.
Ultra-Cast™900/85
Ultra-Cast™ 900/85 PU Elastomer	0.443		3m (95°C)	85A	Natural	Extremely high performance PU Elastomers. Very high levels of abrasion resistance, tear strength and other physical properties. Much lower toxicity than traditional TDI/MOCHA cured systems with similar performance.
Ultra-Cast™900/90
Ultra-Cast™ 900/90 PU Elastomer	0.217		3m (95°C)	90A	Natural	Extremely high performance PU Elastomers. Very high levels of abrasion resistance, tear strength and other physical properties. Much lower toxicity than traditional TDI/MOCHA cured systems with similar performance.
Ultra-Cast™900/95
Ultra-Cast™ 900/95 PU Elastomer	0.106		3m (95°C)	95A	Natural	Extremely high performance PU Elastomers. Very high levels of abrasion resistance, tear strength and other physical properties. Much lower toxicity than traditional TDI/MOCHA cured systems with similar performance.

Master-Cast™ - PU ELASTOMERS

	Ratio with part B
Name & Description	Wt.	Vol.	Gel (100g)	Shore	Colour	Comments
Master-Cast™ E005
Master-Cast™ E005 PU Elastomer	2.16	3.42	30m	85A	Black	Flame retardant, excellent hydrolysis resistance
Master-Cast™ E007
Master-Cast™ E007 PU Elastomer	2	2.15	15m	85A	White	Handmix thixotropic elastomer
Master-Cast™ E008
Master-Cast™ E008 PU Elastomer	6.5	7.85	20m	Gel	White	Vibration-damping, cures to tacky gel
Master-Cast™ E012
Master-Cast™ E012 PU Elastomer	6	5.35	10m	78A	Black	Fast gel version of Master-Cast™ E020
Master-Cast™ E018
Master-Cast™ E018 PU Elastomer	1	1	45m	58A	Black	Slow potting compound, very low viscosity
Master-Cast™ E020
Master-Cast™ E020 PU Elastomer	6	5.35	18m	78A	Black	Slow gel version of Master-Cast™ E012
Master-Cast™ E025
Master-Cast™ E025 PU Elastomer	1	1.15	10m	58A	Natural	Re-enterable encapsulant
Master-Cast™ E030
Master-Cast™ E030 PU Elastomer	0.91	1	35s (10g)	60A	Natural	Soft flexible cartridgeable
Master-Cast™ E035
Master-Cast™ E035 PU Elastomer	6	5.16	11m	73A	Grey	Aluminium filled, good heat conduction
Master-Cast™ E036
Master-Cast™ E036 PU Elastomer	1.75	1.58	10m	85A	Black	Flame retardant
Master-Cast™ E039
Master-Cast™ E039 PU Elastomer	6	5.35	30m	75A	Black	Slow gel version of Master-Cast™ E020
Master-Cast™ E042
Master-Cast™ E042 PU Elastomer	1	1.04	20m	50A	Natural	Flexible PU gelcoat
Master-Cast™ E060
Master-Cast™ E060 PU Elastomer	1	1.04	2h	50A	Natural	Flexible PU gelcoat
Master-Cast™ E067
Master-Cast™ E067 PU Elastomer	2	2.15	30m	85A	Natural	Slow gel, lower viscosity version of Master-Cast™ E007
Master-Cast™ E069
Master-Cast™ E069 PU Elastomer	0.92	1	6m (20g)	75A	Black	Cartridgeable thixotropic elastomer
Master-Cast™ E071
Master-Cast™ E071 PU Elastomer	0.92	1	6m (40g)	75A	Natural	Cartridgeable non-thixotropic elastomer
Master-Cast™ E073
Master-Cast™ E073 PU Elastomer	0.89	1	45s (10g)	70A	Natural	Soft flexible cartridgeable
Master-Cast™ E075
Master-Cast™ E075 PU Elastomer	0.92	1	45s (10g)	50A	Natural	Soft flexible cartridgeable
Master-Cast™ E076
Master-Cast™ E076 PU Elastomer	12	12.6	12h	Gel	Clear	Bottle-filling medium for visual effects
Master-Cast™ E077
Master-Cast™ E077 PU Elastomer	1	1.04	2h	50A	Natural	Lower viscosity version of Master-Cast™ E060
Master-Cast™ E094
Master-Cast™ E094 PU Elastomer	2	2.57	15m	95A	Natural	2-Part PU Primer

Master-Cast™ - RIGID PU

	Ratio with part B
Name & Description	Wt.	Vol.	Gel (100g)	Shore	Colour	Comments
Master-Cast™ R001
Master-Cast™ R001 Rigid PU	1	1.15	15m	75D	White	Cool cure, thick & thin section
Master-Cast™ R006
Master-Cast™ R006 Rigid PU	1	1	65m	85D	Water	Clear Rigid for 5-50mm, requires postcure (40-50°C)
Master-Cast™ R009
Master-Cast™ R009 Rigid PU	1	1	12m (20g)	85D	Water	Clear Rigid for 1-5mm
Master-Cast™ R011
Master-Cast™ R011 Rigid PU	0.87	1	50s (10g)	90D	Beige	Very rigid cartridge compound
Master-Cast™ R012
Master-Cast™ R012 Rigid PU	1	1.15	60m	75D	White	Long gel version of Master-Cast™ R001
Master-Cast™ R014
Master-Cast™ R014 Rigid PU	2	1.62	12m	85D	Black	General purpose rigid moulding compound
Master-Cast™ R037
Master-Cast™ R037 Rigid PU	1	1.17	6m	83D	Natural	High Impact Rigid PU
Master-Cast™ R041
Master-Cast™ R041 Rigid PU	0.9	1	7m	65D	Black	Cartridgeable - delayed thixotropy
Master-Cast™ R042
Master-Cast™ R042 Rigid PU	1.66	2	4m	70D	Natural	Cartridgeable for food contact, not yet food approved
Master-Cast™ R051
Master-Cast™ R051 Rigid PU	0.93	1	2m	65D	Water	1:1 semi-rigid doming resin, fast-gel Master-Cast™ R085
Master-Cast™ R059
Master-Cast™ R059 Rigid PU	0.9	1	8m	75D	Black	Semi-rigid gelcoat
Master-Cast™ R061
Master-Cast™ R061 Rigid PU	1	1.17	50m	85D	Natural	Very slow gel version of Master-Cast™ R037
Master-Cast™ R062
Master-Cast™ R062 Rigid PU	1.8	2.14	8m	65D	Natural	Semi-rigid casting PU
Master-Cast™ R063
Master-Cast™ R063 Rigid PU	1	1.17	13m	83D	Natural	Slow gel version of Master-Cast™ R037
Master-Cast™ R064
Master-Cast™ R064 Rigid PU	1	1.08	10m	80D	Natural	Rigid gelcoat
Master-Cast™ R067
Master-Cast™ R067 Rigid PU	1.6	1.27	12m	85D	White	White version of Master-Cast™ R014
Master-Cast™ R069
Master-Cast™ R069 Rigid PU	1	1.15	5m	75D	White	Fast gel version of Master-Cast™ R001
Master-Cast™ R070
Master-Cast™ R070 Rigid PU	3	2.07	5m	87D	Grey	Aluminium-filled rigid - Fast
Master-Cast™ R071
Master-Cast™ R071 Rigid PU	3	2.07	10m	87D	Grey	Aluminium-filled rigid - Medium
Master-Cast™ R075
Master-Cast™ R075 Rigid PU	1.2	1.27	5m	87D	White	Flame retardant version of Master-Cast™ R037
Master-Cast™ R079
Master-Cast™ R079 Rigid PU	3	2.15	22m	87D	Grey	Glass-filled, tough, abrasion resistant, machinable.
Master-Cast™ R082
Master-Cast™ R082 Rigid PU	1.2	1.27	50m	87D	White	Slow gel version of Master-Cast™ R075
Master-Cast™ R083
Master-Cast™ R083 Rigid PU	1.8	2.14	54m	65D	Natural	Slow gel version of Master-Cast™ R062
Master-Cast™ R085
Master-Cast™ R085 Rigid PU	0.9	1	15m (2-3mm)	72D	Water	Water-clear semi-rigid for doming and badging
Master-Cast™ R086
Master-Cast™ R086 Rigid PU	3	2.12	25m	90D	Grey	Gel-coat version of Master-Cast™ R079
Master-Cast™ R087
Master-Cast™ R087 Rigid PU	3	2.15	55m	87D	Grey	Slow gel version of Master-Cast™ R079
Master-Cast™ R095
Master-Cast™ R095 Rigid PU	1	1.15	10m	75D	White	Faster gel version of Master-Cast™ R001
Master-Cast™ R103
Master-Cast™ R103 Rigid PU	0.9	1	30m	72D	Water	Slow gel version of Master-Cast™ R085
Master-Cast™ R119
Master-Cast™ R119 Rigid PU	1.2	1.27	30m	85D	Natural	Slow gel version of Master-Cast™ R075
Master-Cast™ R133
Master-Cast™ R133 Rigid PU	3	2.12	10m	90D	Grey	Faster version of Master-Cast™ R086
Master-Cast™ R134
Master-Cast™ R134 Rigid PU	1	1	8m	75D	Water	Higher viscosity version of Master-Cast™ R085
Master-Cast™ R137
Master-Cast™ R137 Rigid PU	3	2.16	10m	90D	Off-white	Flame retardant version of Master-Cast™ R133

Master-Cast™ - PU FOAM

	Ratio with part B
Name & Description	Wt.	Vol.	Gel (100g)	SG	Colour	Comments
Master-Cast™ EF003
Master-Cast™ EF003 Flexible PU Foam	0.93	1	2m	0.5	Black	High strength, cartridgeable, hard gasket foam
Master-Cast™ EF010
Master-Cast™ EF010 Flexible PU Foam	2	2.13	5m	0.12	Natural	Very soft moulding foam
Master-Cast™ EF002
Master-Cast™ EF002 Flexible PU Foam	3	3.66	2m	0.2	Natural	Self-skinning flexible foam
Master-Cast™ RF001
Master-Cast™ RF001 Rigid PU Foam	1	1.2	8m (50g)	0.17	Beige	General purpose Moulding foam
Master-Cast™ RF002
Master-Cast™ RF002 Rigid PU Foam	1	1.2	8m (50g)	0.12	Beige	General purpose Moulding foam
Master-Cast™ RF003
Master-Cast™ RF003 Rigid PU Foam	1	1.2	7m (50g)	0.07	Beige	General purpose Moulding foam
Master-Cast™ RF005
Master-Cast™ RF005 Semi-rigid PU Foam	0.77	1	3m (50g)	0.17	Beige	Semi-rigid cartridgeable foam
Master-Cast™ RF006
Master-Cast™ RF006 Rigid PU Foam	1	1.2	8m (50g)	0.17	Beige	Long cream-time version of Master-Cast™ RF001
Master-Cast™ RF007
Master-Cast™ RF007 Rigid PU Foam	0.5	0.61	60s (50g)	0.03	Beige	Packaging & Void-Filling foam
Master-Cast™ RF009
Master-Cast™ RF009 Rigid PU Foam	0.9	1	60s (50g)	0.13	White	Rigid cartridgeable foam
Master-Cast™ RF010
Master-Cast™ RF010 Semi-rigid PU Foam	0.89	1	60s (50g)	0.13	Black	Semi-rigid cartridgeable foam

Master-Cast™ - EPOXY RESINS

	Ratio with part B
Name & Description	Wt.	Vol.	Gel (100g)	Shore	Colour	Comments
Master-Cast™ X007
Master-Cast™ X007 Epoxy Resin	8	5.31	120m	88D	Grey	Aluminium filled, low shrink, fast catalyst available
Master-Cast™ X011
Master-Cast™ X011 Epoxy Resin	8	5.31	120m	88D	Light Grey	Mineral filled, low shrink, fast catalyst available
Master-Cast™ X016
Master-Cast™ X016 Epoxy Resin	4.4	4	4h	85D	Water	Water-clear casting epoxy, requires postcure (40-50°C)
Master-Cast™ X020
Master-Cast™ X020 Epoxy Resin	2	1.74	85m	84D	Water	Clear laminating epoxy. Tough, good wetting.
Master-Cast™ X024
Master-Cast™ X024 Epoxy Resin	6	3.12	4h	88D	Grey	Aluminium-filled tooling epoxy, high temperature.
Master-Cast™ X026
Master-Cast™ X026 Epoxy Resin	12.5	7.05	130m (5mm)	90D	Grey	Aluminium-filled epoxy gelcoat

Master-Cast™ - RTV SILICONES

Name & Description	Catalyst (%)	Pot Life	Shore	Comments
Master-Cast™ RTV1155
Master-Cast™ RTV1155	10	75m	55A	For use with low-melting alloys
Master-Cast™ RTV1315
Master-Cast™ RTV1315	2	20m/35m/50m	15A	GP moulding rubber. Very good viscosity. Excellent physical properties.
Master-Cast™ RTV1320
Master-Cast™ RTV1320	2	30m/60m/80m	20A	GP moulding rubber. Very good viscosity. Excellent physical properties.
Master-Cast™ RTV1325
Master-Cast™ RTV1325	2	30m/60m/80m	25A	GP moulding rubber. Very good viscosity. Excellent physical properties.
Master-Cast™ RTV1330
Master-Cast™ RTV1330	2	30m/60m/80m	30A	GP moulding rubber. Very good viscosity. Excellent physical properties.
Master-Cast™ RTV5530
Master-Cast™ RTV5530	20	50m	30A	GP moulding rubbers. Very good viscosities. Excellent physical properties.
Master-Cast™ RTV5540
Master-Cast™ RTV5540	20	50m	40A	GP moulding rubbers. Very good viscosities. Excellent physical properties.
Master-Cast™ RTV5560
Master-Cast™ RTV5560	10	80m	60A	GP moulding rubbers. Very good viscosities. Excellent physical properties.
Master-Cast™ RTV5630
Master-Cast™ RTV5630	20	70m	30A	Oil-bleed version of Master-Cast™ RTV5530
Master-Cast™ RTV5640
Master-Cast™ RTV5640	20	50m	40A	Oil-bleed version of Master-Cast™ RTV5540

Crystal-Cast™ - ELASTOMER

	Ratio with part B
Name & Description	Wt.	Vol.	Gel (100g)	Shore	Colour	Comments
Crystal-Cast™ E091
Crystal-Cast™ E091 PU Elastomer	2.5	2.62	17 min.	60A	Water	Water-Clear Flexible PU
Crystal-Cast™ VE096
Crystal-Cast™ VE096 PU Elastomer	2.5	2.62	17 min.	60A	Water	Vacuum-Casting Grade of Crystal-Cast™ E091

Crystal-Cast™ - RIGID PU

	Ratio with part B
Name & Description	Wt.	Vol.	Gel (100g)	Shore	Colour	Comments
Crystal-Cast™ R130
Crystal-Cast™ R130 Rigid PU	1	1.03	12 min.	84D	Water	For casting sections 1 - 5mm
Crystal-Cast™ R131
Crystal-Cast™ R131 Rigid PU	1	1.03	40 min.	84D	Water	For casting sections 5 - 50mm
Crystal-Cast™ R132
Crystal-Cast™ R132 Rigid PU	1	1.03	80 min. (10kg)	84D	Water	For casting sections above 50mm
Crystal-Cast™ VR138
Crystal-Cast™ VR138 Rigid PU	0.65	0.66	8 min. (70°C)	85D	Water	Vacuum-Casting Grade

Gel-Cast™

	Ratio with part B
Name & Description	Wt.	Vol.	Gel (100g)	Shore	Colour	Comments
Gel-Cast™ 5
Gel-Cast™ 5 Shore A PU Elastomer	4.2	4.4	8 min.	5A	Straw	Soft PU Elastomer series
Gel-Cast™ 15
Gel-Cast™ 15 Shore A PU Elastomer	4.2	4.4	8 min.	15A	Straw	Soft PU Elastomer series
Gel-Cast™ 20
Gel-Cast™ 20 Shore A PU Elastomer	4.2	4.4	8 min.	20A	Straw	Soft PU Elastomer series
Gel-Cast™ 25
Gel-Cast™ 25 Shore A PU Elastomer	4.2	4.4	8 min.	25A	Straw	Soft PU Elastomer series
Gel-Cast™ 30
Gel-Cast™ 30 Shore A PU Elastomer	4.2	4.4	8 min.	30A	Straw	Soft PU Elastomer series
Gel-Cast™ 35
Gel-Cast™ 35 Shore A PU Elastomer	4.2	4.4	8 min.	35A	Straw	Soft PU Elastomer series
Gel-Cast™ 40
Gel-Cast™ 40 Shore A PU Elastomer	4.2	4.4	8 min.	40A	Straw	Soft PU Elastomer series

Gel-Cast™ - Gel-Cast™ Cartridgeable

	Ratio with part B
Name & Description	Wt.	Vol.	Gel (100g)	Shore	Colour	Comments
Gel-Cast™ Cartridgeable 5
Cartridgeable Gel-Cast™ 5 Shore A PU Elastomer	0.95	1	90 sec. (35g)	5A	Straw	Soft Cartridgeable PU Elastomer Series
Gel-Cast™ Cartridgeable 10
Cartridgeable Gel-Cast™ 10 Shore A PU Elastomer	0.95	1	90 sec. (35g)	10A	Straw	Soft Cartridgeable PU Elastomer Series
Gel-Cast™ Cartridgeable 15
Cartridgeable Gel-Cast™ 15 Shore A PU Elastomer	0.95	1	90 sec. (35g)	15A	Straw	Soft Cartridgeable PU Elastomer Series
Gel-Cast™ Cartridgeable 20
Cartridgeable Gel-Cast™ 20 Shore A PU Elastomer	0.96	1	90 sec. (35g)	20A	Straw	Soft Cartridgeable PU Elastomer Series
Gel-Cast™ Cartridgeable 25
Cartridgeable Gel-Cast™ 25 Shore A PU Elastomer	0.96	1	90 sec. (35g)	25A	Straw	Soft Cartridgeable PU Elastomer Series
Gel-Cast™ Cartridgeable 30
Cartridgeable Gel-Cast™ 30 Shore A PU Elastomer	0.96	1	90 sec. (35g)	30A	Straw	Soft Cartridgeable PU Elastomer Series

Flex-Bond™

	Ratio with part B
Name & Description	Wt.	Vol.	Gel (100g)	Shore	Colour	Comments
Flex-Bond™ 006
Flex-Bond™ 006 PU Adhesive	0.98	1	50s (10g)	85A	Nat./Black	Fast-cure strong, flexible adhesive
Flex-Bond™ 007
Flex-Bond™ 007 PU Adhesive	2	2.15	15m	85A	Various	Handmix thixotropic tough, strong adhesive
Flex-Bond™ 042
Flex-Bond™ 042 PU Adhesive	1	1.04	20m	50A	Natural	Handmix thixotropic tough, strong adhesive
Flex-Bond™ 060
Flex-Bond™ 060 PU Adhesive	1	1.04	2h	50A	Natural	Very slow version of Flex-Bond™ 042
Flex-Bond™ 066
Flex-Bond™ 066 PU Adhesive	2	2.15	40m	85A	Natural	Slow version of Flex-Bond™ 007
Flex-Bond™ 067
Flex-Bond™ 067 PU Adhesive	2	2.15	30m	85A	Natural	Slow, lower viscosity version of Flex-Bond™ 007
Flex-Bond™ 077
Flex-Bond™ 077 PU Adhesive	1	1.04	2h	50A	Natural	Slow, low viscosity version of Flex-Bond™ 042
Flex-Bond™ 085
Flex-Bond™ 085 PU Adhesive	0.98	1	5m (10g)	85A	Nat./Black	Very slow version of Flex-Bond™ 006
Flex-Bond™ 087
Flex-Bond™ 087 PU Adhesive	0.98	1	15m (10g)	85A	Nat./Black	Slow version of Flex-Bond™ 006
Flex-Bond™ 095
Flex-Bond™ 095 PU Adhesive	0.91	1	15m (10g)	85A	Nat./Black	Lower viscosity version of Flex-Bond™ 087
Flex-Bond™ F003
Flex-Bond™ F003 PU Foam Adhesive	0.93	1	2m	65A	Nat./Black	Foamed version of Flex-Bond™ 006 (~0.5 SG)

Master-Bond™

	Ratio with part B
Name & Description	Wt.	Vol.	Gel (100g)	Shore	Colour	Comments
Master-Bond™ P002
Master-Bond™ P002 Semi-rigid PU Adhesive	0.82	1	50s (10g)	55D	Black	Semi-rigid PU adhesive for automotive repair
Master-Bond™ P027
Master-Bond™ P027 Rigid PU Adhesive	0.87	1	120s	90D	Brown	General purpose rigid PU adhesive
Master-Bond™ P028
Master-Bond™ P028 Semi-rigid PU Adhesive	0.89	1	60s(10g)	75D	Natural	Good GP semi-rigid PU adhesive
Master-Bond™ P043
Master-Bond™ P043 Semi-rigid PU Adhesive	0.89	1	50s (10g)	60D	Black	Semi-rigid PU adhesive for automotive repair
Master-Bond™ P044
Master-Bond™ P044 Rigid PU Adhesive	0.9	1	50s (10g)	85D	Black	Rigid PU adhesive for automotive repair
Master-Bond™ P046
Master-Bond™ P046 Rigid PU Adhesive	0.89	1	10m	75D	Black	Slow gel version of Master-Bond™ P002
Master-Bond™ P065
Master-Bond™ P065 Rigid PU Adhesive	0.86	1	60s (10g)	80D	Black	Fast adhesive for equine applications
Master-Bond™ P104
Master-Bond™ P104 Semi-rigid PU Adhesive	0.88	1	60s (10g)	80D	Black	Rigid PU adhesive for automotive repair
Master-Bond™ P105
Master-Bond™ P105 Semi-rigid PU Adhesive	0.87	1	180s (10g)	80D	Black	Rigid PU adhesive for automotive repair
Master-Bond™ P106
Master-Bond™ P106 Semi-rigid PU Adhesive	0.85	1	50s (10g)	70D	Black	Semi-rigid PU adhesive for automotive repair
Master-Bond™ P109
Master-Bond™ P109 Semi-rigid PU Adhesive	0.85	1	50s (10g)	70D	Black	Semi-rigid PU adhesive for automotive repair
Master-Bond™ P111
Master-Bond™ P111 Rigid PU Adhesive	0.88	1	4min. (10g)	60D	Black	Semi-rigid PU adhesive for automotive repair
Master-Bond™ P112
Master-Bond™ P112 Rigid PU Adhesive	0.86	1	50s (10g)	80D	Natural	Excellent GP Rigid PU adhesive
Master-Bond™ P113
Master-Bond™ P113 Rigid PU Adhesive	0.87	1	60s (10g)	80D	Grey	Rigid PU adhesive for automotive repair
Master-Bond™ P115
Master-Bond™ P115 Rigid PU Adhesive	0.87	1	180s (10g)	80D	Grey	Rigid PU adhesive for automotive repair
Master-Bond™ P116
Master-Bond™ P116 Rigid PU Adhesive	0.88	1	20min. (10g)	80D	Black	GP Rigid PU adhesive
Master-Bond™ P117
Master-Bond™ P117 Rigid PU Adhesive	0.86	1	60min. (10g)	80D	Black	GP Rigid PU adhesive
Master-Bond™ P120
Master-Bond™ P120 Rigid PU Adhesive	0.88	1	60s (10g)	80D	Amber	Rigid PU adhesive for automotive repair
Master-Bond™ P121
Master-Bond™ P121 Rigid PU Adhesive	0.88	1	60s (10g)	80D	Black	Lower visc. version of Master-Bond™ P105
Master-Bond™ P123
Master-Bond™ P123 Rigid PU Adhesive	0.86	1	60s (10g)	80D	White	GP Rigid PU adhesive
Master-Bond™ P124
Master-Bond™ P124 Rigid PU Adhesive	0.85	1	180s (10g)	80D	White	GP Rigid PU adhesive
Master-Bond™ P125
Master-Bond™ P125 Rigid PU Adhesive	0.87	1	40s (10g)	80D	Natural	Fast adhesive for bovine and equine applications
Master-Bond™ P127
Master-Bond™ P127 Rigid PU Adhesive	0.89	1	60s (10g)	80D	Black	Fast Semi-rigid PU adhesive for equine applications
Master-Bond™ P128
Master-Bond™ P128 Rigid PU Adhesive	0.87	1	180s (10g)	80D	Natural	Slower version of Master-Bond™ P125
Master-Bond™ P136
Master-Bond™ P136 Rigid PU Adhesive	0.88	1	180s (10g)	80D	Black	Slower version of Master-Bond™ P121
Master-Bond™ PF005
Master-Bond™ PF005 Rigid PU Adhesive	0.89	1	5m	65D	Black	Tough PU foam adhesive with excellent gap-fill
Master-Bond™ X002
Master-Bond™ X002 Epoxy Adhesive	1.03	1	50s (10g)	85D	Blue-Clear	Very-fast self indicating epoxy adhesive
Master-Bond™ X003
Master-Bond™ X003 Epoxy Adhesive	1.03	1	5m	85D	Clear	Fast general-purpose epoxy adhesive
Master-Bond™ X004
Master-Bond™ X004 Epoxy Adhesive	1.07	1	5m (10g)	90D	Grey	Fast general-purpose epoxy adhesive
Master-Bond™ X018
Master-Bond™ X018 Epoxy Adhesive	2	1.95	20m	85D	Cream	Hand-mix epoxy flooring adhesive
Master-Bond™ X029
Master-Bond™ X029 Toughened Epoxy Adhesive	1	0.8	90m	65D	Off-white	Very flexible epoxy adhesive
Master-Bond™ X033
Master-Bond™ X033 Epoxy Adhesive	2.4	2.1	20m	85D	Off-white	Strong hand-mix epoxy, excellent in wet conditions
Master-Bond™ X034
Master-Bond™ X034 Epoxy Adhesive	2.3	2	20m	85D	Off-white	Cartridgeable version of Master-Bond™ X033

Ex-PUR-t™ - Ex-PUR-t™

Name & Description	Open time	Viscosity	Comments
Ex-PUR-t™ 1
Ex-PUR-t™ 1	70 s	6500 mPa.s	Low viscosity, fast set.
Ex-PUR-t™ 2
Ex-PUR-t™ 2	100 s	10,500 mPa.s	Medium viscosity, medium open time
Ex-PUR-t™ 3
Ex-PUR-t™ 3	240 s	10,500 mPa.s	Medium viscosity, long open time
Ex-PUR-t™ D006-2
Ex-PUR-t™ D006-2	240s	> 90,000 mPa.s	Extremely good hydrolysis resistance

Unicure™ & Ancillaries - Unicure™

Name & Description	Colour	Comments
Unicure™ V003
Unicure™ V003 1-Part PVC Plastisol	Natural	Thixotropic. Cures @ >110°C to semi-clear 50 Shore A elastomer. Phthalate-free.
Unicure™ P007
Unicure™ P007 1-part Heat-Cure Polyurethane	Beige	Thixotropic. Cures above 100°C to form tough, strong 80 Shore A elastomer.
Unicure™ A007
Unicure™ A007 1-part non-hazardous clear resin	Water clear	Cures above 110°C to give tough rigid clear resin. Non-hazardous formulation.
Unicure™ X028
Unicure™ X028 Single-part Heat-cure Adhesive	Off-white	Thixotropic. Cures above 140°C to give toughened rigid bond

Unicure™ & Ancillaries - ANCILLARIES

Name & Description	Colour	Comments
AD001
2-Part Etch Primer for metals	Red/Brown	Expensive, but very good on many metal substrates.
AD002
1-part primer for olefinic substrates	Clear	Useful primer for polyolefins and some other plastics.
AD003
1-part chlorinating primer	Clear	Effective primer for wide variety of polymeric surfaces.

Unicure™ & Ancillaries - CLEANERS

Name & Description	Colour	Comments
CL002
Cleaner for cured isocyanate (liquid)	Straw	Highly effective cleaner for deposits of cured isocyanate - mobile liquid.
CL003
Cleaner for cured isocyanate (gel)	Straw	Highly effective cleaner for deposits of cured isocyanate - thixotropic gel.
CL004
Cleaner for cured silicone (liquid)	Brown	Cleaner for removing deposits of cured silicone - mobile liquid.
CL005
Cleaner for cured silicone (gel)	Green	Cleaner for removing deposits of cured silicone - thixotropic gel.

Unicure™ & Ancillaries - DECONTAMINANTS

Name & Description	Colour	Comments
OT022
OT022 Solid decontaminant for isocyanate	Brown	Absorbant, quickly neutralises isocyanate spillage hazard
OT024
OT024 Liquid decontaminant for isocyanate	Green	Rapid decontaminant for drum residues and spillage clean-up
OT009
Soft-melting thermoplastic resin	White	Extremely tough, impact resistant polymer that can be softened and melted using hot water and moulded by hand. Cools to produce a tough rigid plastic.

Unicure™ & Ancillaries - SEALANTS

Name & Description	Colour	Comments
DOT008
1-part moisture-cure aliphatic polyurethane	Clear	Seals almost any type of porous surface prior to moulding. Cures to tough, clear film.
DOT010
Wax modelling and impression compound	Off White	Wax-based modelling compound. Can be re-melted and re-used many times. Fairly hard - other grades available.

Unicure™ & Ancillaries - RELEASE AGENTS

Name & Description	Colour	Comments
RA001
Wax release agent for all types of resin casting	Milky white	Excellent versatile release agent for application by brush, spray or wipe. For moulding temperatures below 45°C. Aerosol version available.
RA002
Wax release agent for all types of resin casting	Milky white	Higher-solids version of RA001.
WAX-1
Aerosol version of RA001	Milky white	Excellent versatile aerosol release agent. For moulding temperatures below 45°C. Bulk version available.