Unicure™ & Ancillaries
One-part heat-cure or UV-cure products. Polyurethane, epoxy and PVC grades, for applications such as adhesives, screen-printing, repair of flexible surfaces.
Unicure™ & Ancillaries - Unicure™
| Name & Description |
Colour |
Comments |
| Unicure™ V003 |
| Unicure™ V003 1-Part PVC Plastisol | Natural | Thixotropic. Cures @ >110°C to semi-clear 50 Shore A elastomer. Phthalate-free. |
| Unicure™ P007 |
| Unicure™ P007 1-part Heat-Cure Polyurethane | Beige | Thixotropic. Cures above 100°C to form tough, strong 80 Shore A elastomer. |
| Unicure™ A007 |
| Unicure™ A007 1-part non-hazardous clear resin | Water clear | Cures above 110°C to give tough rigid clear resin. Non-hazardous formulation. |
| Unicure™ X028 |
| Unicure™ X028 Single-part Heat-cure Adhesive | Off-white | Thixotropic. Cures above 140°C to give toughened rigid bond |
Unicure™ & Ancillaries - ANCILLARIES
| Name & Description |
Colour |
Comments |
| AD001 |
| 2-Part Etch Primer for metals | Red/Brown | Expensive, but very good on many metal substrates. |
| AD002 |
| 1-part primer for olefinic substrates | Clear | Useful primer for polyolefins and some other plastics. |
| AD003 |
| 1-part chlorinating primer | Clear | Effective primer for wide variety of polymeric surfaces. |
Unicure™ & Ancillaries - CLEANERS
| Name & Description |
Colour |
Comments |
| CL002 |
| Cleaner for cured isocyanate (liquid) | Straw | Highly effective cleaner for deposits of cured isocyanate - mobile liquid. |
| CL003 |
| Cleaner for cured isocyanate (gel) | Straw | Highly effective cleaner for deposits of cured isocyanate - thixotropic gel. |
| CL004 |
| Cleaner for cured silicone (liquid) | Brown | Cleaner for removing deposits of cured silicone - mobile liquid. |
| CL005 |
| Cleaner for cured silicone (gel) | Green | Cleaner for removing deposits of cured silicone - thixotropic gel. |
Unicure™ & Ancillaries - DECONTAMINANTS
| Name & Description |
Colour |
Comments |
| OT022 |
| OT022 Solid decontaminant for isocyanate | Brown | Absorbant, quickly neutralises isocyanate spillage hazard |
| OT024 |
| OT024 Liquid decontaminant for isocyanate | Green | Rapid decontaminant for drum residues and spillage clean-up |
| OT009 |
| Soft-melting thermoplastic resin | White | Extremely tough, impact resistant polymer that can be softened and melted using hot water and moulded by hand. Cools to produce a tough rigid plastic. |
Unicure™ & Ancillaries - SEALANTS
| Name & Description |
Colour |
Comments |
| DOT008 |
| 1-part moisture-cure aliphatic polyurethane | Clear | Seals almost any type of porous surface prior to moulding. Cures to tough, clear film. |
| DOT010 |
| Wax modelling and impression compound | Off White | Wax-based modelling compound. Can be re-melted and re-used many times. Fairly hard - other grades available. |
Unicure™ & Ancillaries - RELEASE AGENTS
| Name & Description |
Colour |
Comments |
| RA001 |
| Wax release agent for all types of resin casting | Milky white | Excellent versatile release agent for application by brush, spray or wipe. For moulding temperatures below 45°C. Aerosol version available. |
| RA002 |
| Wax release agent for all types of resin casting | Milky white | Higher-solids version of RA001. |
| WAX-1 |
| Aerosol version of RA001 | Milky white | Excellent versatile aerosol release agent. For moulding temperatures below 45°C. Bulk version available. |
